二维超声联合超声造影TIC参数在乳腺导管内病变良/恶性诊断中的应用价值

本研究分析了二维超声(2DUS)联合超声造影(CEUS)时间-强度曲线(TIC)参数在乳腺导管内病变良/恶性鉴别诊断中的应用价值。选取乳腺导管内病变患者81例(共93个病变),均行2DUS及CEUS检查。结果显示,2DUS检出恶性病变17个,良性病变48个,诊断准确度69.89%(65/93)、敏感度53.13%(17/32)、特异度78.69%(48/61),阳性预测值为56.67%(17/30),阴性预测值为76.19%(48/63)。恶性病变达峰时间早于良性病变(P<0.05),峰值强度、曲线上升支斜率、曲线下面积均高于良性病变(P<0.05)。ROC曲线分析结果显示:2DUS联合CEUS-TIC参数鉴别诊断乳腺导管内病变良/恶性的AUC、敏感度、特异度均高于2DUS或CEUS单独检查(P<0.05)。因此可知,对于乳腺导管内病变,2DUS联合CEUS检查可明显提高对良/恶性的鉴别诊断效能。     

CT检查参数对腰椎管狭窄症的诊断价值及与疗效、腰椎功能改善的相关性分析

选取我院60例腰椎管狭窄症(LSS)患者作为研究组,同期健康者60例作为对照组,探究CT检查参数对LSS的诊断价值及与疗效、腰椎功能改善的相关性。结果显示,研究组椎管面积、硬膜囊面积、椎管矢径、椎管横径、侧隐窝矢径、侧隐窝角小于对照组(P<0.05);CT各参数联合诊断LSS的AUC值大于任一参数单独诊断;疗效优良患者术后3个月椎管面积、硬膜囊面积、椎管矢径、侧隐窝矢径、侧隐窝角大于治疗前及非优良患者(P<0.05);经偏相关性分析发现,CT检查参数与疗效显著相关(P<0.05)。说明LSS疗效、腰椎功能改善情况与椎管面积、硬膜囊面积、椎管矢径等关系密切,CT检查对指导临床完善手术方案有重要意义。     

超声弹性成像参数联合血清MK和VEGF对分化型甲状腺癌的诊断价值及与肿瘤恶性程度关系研究

本研究选取了分化型甲状腺癌(DTC)患者106例为甲状腺癌组,同期106例甲状腺腺瘤患者为甲状腺腺瘤组,检测比较了两组患者的超声弹性成像参数(弹性比值、蓝色面积比值)、血清中期因子(midkine,MK)、血管内皮生长因子(VEGF)水平。研究结果发现,弹性比值、蓝色面积比值、血清MK和VEGF水平与DTC患者淋巴结转移、包膜侵犯、临床分期相关(P<0.05);弹性比值、蓝色面积比值、血清MK和VEGF水平联合诊断DTC的曲线下面积(AUC)为0.888;弹性比值、蓝色面积比值、血清MK及VEGF水平与DTC患者组织中趋化因子受体(CXCR)4、解聚素金属蛋白酶(ADAM)9、靶向Xklp2靶蛋白(TPX2)基因表达量呈正相关,与程序性细胞死亡因子(PDCD)4基因表达量呈负相关。这些结果提示超声弹性成像参数、血清MK及VEGF水平上调可能用来评估DTC患者病情程度及肿瘤恶性程度,三者联合对DTC具有可靠诊断价值,可为临床诊治提供参考。     

Low‐memory iterative density fitting

A new low‐memory modification of the density fitting approximation based on a combination of a continuous fast multipole method (CFMM) and a preconditioned conjugate gradient solver is presented. Iterative conjugate gradient solver uses preconditioners formed from blocks of the Coulomb metric matrix that decrease the number of iterations needed for convergence by up to one order of magnitude. The matrix‐vector products needed within the iterative algorithm are calculated using CFMM, which evaluates them with the linear scaling memory requirements only. Compared with the standard density fitting implementation, up to 15‐fold reduction of the memory requirements is achieved for the most efficient preconditioner at a cost of only 25% increase in computational time. The potential of the method is demonstrated by performing density functional theory calculations for zeolite fragment with 2592 atoms and 121,248 auxiliary basis functions on a single 12‐core CPU workstation. © 2015 Wiley Periodicals, Inc.     

催化剂筛选：火山型曲线成因理论解析及其在多相催化中的应用

多相催化对于现代社会来说具有极其重要的意义,催化剂的理性设计/筛选是现代催化化学研究者的一个重要的目标。其中,火山型曲线是一个的重要工具。它指出对于一个催化反应来说,其催化活性针对关键物种吸附能来说呈一条先上升后下降的曲线,要求最佳催化剂对中间体的吸附能不能太高也不能太低。近几十年来,密度泛函理论等第一性原理计算方法的发展让许多催化剂表面反应微观物理量的计算成为了可能,这极大地拓展了火山型曲线的应用范围。 然而,对于火山型曲线根源的解释,人们却并非了解得十分清楚;一些基本科学概念的理解很多还是基于经验性的Sabatier原理：吸附太弱不利于吸附、太强不利于脱附。针对该问题的科学解析,本文进行了详细的动力学探究,试图以完全数学解析的方式回答催化反应中火山型曲线的必然存在性、产生根源及在催化活性预测中的内涵。本文采用了两步催化模型以及微动力学来进行速率方程的推导,并考虑BEP关系(基元反应的能垒与其反应焓存在线性关系)的应用,最终将整体反应速率转化为中间体吸附能相关的单值函数。基于对该函数的系列推导和分析,得到如下基本结论：(1)从数学上以一个完全的解析形式证明了催化反应中火山型曲线的存在。(2)通过对比催化反应与与之对应的气相反应,我们证明了：若无催化剂参与反应,则火山型曲线不会产生;由于催化剂表面的参与,随着催化剂吸附能力的增强,其表面会因为吸附作用而被占据毒化,导致反应速率存在一个最大值,即形成火山型曲线。从概念上讲,火山型曲线的根源是由“吸附过程引发表面活性位占据”这一自毒化效应造成的,它的存在可能体现为多相催化的基本属性。(3)数值模拟解析展示了表面反应与气相反应的区别,印证了我们的数学解析结论。同时,通过一定的简化,我们对火山型曲线中各部分的斜率进行了研究。结果发现,对于吸附决速过程,催化反应和气相反应斜率相同,其差别主要出现在脱附决速过程。在此阶段由于吸附能过大,表面被毒化,表面反应速率开始下降;而气相反应的速率依然上升。(4)表面反应速率方程的分解和简化结果表明,最佳催化剂在反应中的空活性位点覆盖度和其BEP关系的斜率存在内在关联关系(θ*opt=1–α),据此讨论了其在催化剂寻优过程中的意义。尝试解释了(a)合成氨反应中正逆反应所需最佳催化剂不同的现象;(b)合成氨或CO甲烷化反应最佳催化剂为前过渡金属、而CO/NO氧化等为后过渡金属这一典型催化现象的物理图像。最后,针对火山型曲线理论框架在实际催化剂理论筛选寻优中的应用,我们简要综述了本课题组近年来在光解水制氢Pt基助催化剂和染料敏化太阳能电池的对电极材料设计方面的理论进展。     

桩基承载力计算程序GPILE

介绍了单桩和群桩承载力计算程序 GPILE。该程序利用 P-Y曲线、T-Z曲线和 Q-Z曲线将土体与桩之间的相互作用模拟为一系列非线性弹簧 ,然后通过迭代求解桩的变形和内力。在计算群桩时可以考虑群桩效应。另外 ,还可以在桩基上增加上部结构 ,从而考虑桩基和上部结构的共同作用     

WIDECARS spectra fitting in a premixed ethylene–air flame

WIDECARS measures temperature and mole fractions of most of the major species in ethylene–air flames. One of the issues in implementing this technique is fitting the experimental spectra to theory to obtain flame conditions (temperature, species mole fractions). Individual spectra contain many species resonances, and theory is slow to compute. Libraries of precalculated spectra can be used, but a library of sufficient density for accurate interpolation is large given the many variables. A new fitting algorithm is presented which utilizes a less‐dense library, and additional spectra are calculated during fitting to maintain accuracy. The iterative convergence method converts the problem of minimizing fit error, which converges slowly, to a zero finding problem, which converges reliably, rapidly, and accurately to best fit. Various practical fitting issues, such as the effects of dye laser mode noise and variability, phase‐matching efficiency, and shifts of the spectrum on the spectrometer are addressed. The technique is demonstrated in the analysis of experimental measurements in an equivalence ratio 2.1 ethylene–air flame above the surface of a McKenna burner. Precision errors because of experimental and fitting effects are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

A numerical approach to spherical indentation techniques for material property evaluation

In this work, some inaccuracies and limitations of prior indentation theories, which are based on experimental observations and the deformation theory of plasticity, are investigated. Effects of major material properties on the indentation load-deflection curve are examined via finite element (FE) analyses based on incremental plasticity theory. It is confirmed that subindenter deformation and stress-strain distribution from deformation plasticity theory are quite dissimilar to those obtained from incremental plasticity theory. We suggest an optimal data acquisition location, where the strain gradient is the least and the effect of friction is negligible. A new numerical approach to indentation techniques is then proposed by examining the FE solutions at the optimal point. Numerical regressions of obtained data exhibit that the strain-hardening exponent and yield strain are the two key parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides a stress-strain curve and material properties with an average error of less than 3%.     

Studies on Bifurcation and Chaos of a String-Beam Coupled System with Two Degrees-of-Freedom

In this paper, research on nonlinear dynamic behavior of a string-beam coupled system subjected to parametric and external excitations is presented. The governing equations of motion are obtained for the nonlinear transverse vibrations of the string-beam coupled system. The Galerkin's method is employed to simplify the governing equations to a set of ordinary differential equations with two degrees-of-freedom. The case of 1:2 internal resonance between the modes of the beam and string, principal parametric resonance for the beam, and primary resonance for the string is considered. The method of multiple scales is utilized to analyze the nonlinear responses of the string-beam coupled system. Based on the averaged equation obtained here, the techniques of phase portrait, waveform, and Poincare map are applied to analyze the periodic and chaotic motions. It is found from numerical simulations that there are obvious jumping phenomena in the resonant response–frequency curves. It is indicated from the phase portrait and Poincare map that period-4, period-2, and periodic solutions and chaotic motions occur in the transverse nonlinear vibrations of the string-beam coupled system under certain conditions. An erratum to this article is available at .     

应用数字图像相关方法测量含缺陷试样的全场变形

利用数字图像相关方法测量表面带孔洞、裂纹、缺口等缺陷试样的全场变形是许多实际测量任务中经常遇到的问题。就此问题，本文阐述了一种先对要避免计算的缺陷区域进行标记，在随后进行的相关计算中直接避免这些标记区域的方法。在已计算得到全场位移的情况下，文中提出了基于局部位移场最小二乘拟合的方法来计算区域边界、孔洞、裂纹或缺口附近等区域应变。最后对单侧边带半圆缺口试样的单向疲劳拉伸实验的计算结果充分显示本文方法的有效性和可靠性。